Auxiliary CAM (OkikaVortex Chips)

The Auxiliary CAM supersedes the outclk CAM used in earlier versions of AnadigmDesigner®2. Double-clicking the CAM with the left mouse button will cause the Set CAM Parameters window to be displayed. The Auxiliary CAM allows certain selected signals to be routed out to external pin 27 of the chip package. The settings include methods to route clocks, comparator output, and RAM transfer triggers out through pin 27. Left double-clicking the cell will bring up its settings window. There is a "Documentation" button on the right hand side of the settings window that will describe its various functions.